Chrysler Six

Send This Page To A Friend
Chrysler

Chrysler Six

1924 - 1931
Country:
USA
Engine:
L6
Capacity:
3.3 liter
Power:
51kW/68 hp @ 3000 rpm
Transmission:
3 spd manual.
Top Speed:
112 km/h (70 mph)
Number Built:
32,000+
Collectability:
5 star
Walter P. Chrysler wanted the Chrysler Six to be a light vehicle, seat five passengers, and be economical to own and operate. He wanted it to be a model of durability and performance.

Production for the first year was 32,000 units, which at that time was the largest number ever of a new American vehicle launch. The car was known as the Chrysler B70 within the company but as commonly occurred in those days, the car took the name of the engine, thus it became the Chrysler Six to the public.

The car was equipped with a six cylinder "L-head" engine with Ricardo combustion chambers. The turbulent heads used for the combustion chambers made the engine quieter and more powerful than other competitive units. Top speed was almost 112 km/h (70 mph).

The compression ratio was 4.7:1, which was thought impossible till then since the norm was 4.1:1. The 3.3-L engine delivered 51 kW (68 hp) at 3000 rpm and 184 Nm (136 lb.ft) of torque at 1000 rpm. The block was cast iron with a bore of 76.2 mm (3 in) and a stroke of 120.4 mm (4.74 in).

It used solid lifters and had seven main bearings. The engine was equipped with aluminum pistons and forced lubrication. The carburetor was either a two stage ball and ball type or a Stromberg, both with centrifugal air cleaners.

The vehicle was equipped with four wheel hydraulic brakes, which were unique for a car of that price range, as contemporary cars of the era still used mechanical brakes. The brakes were supplied by Lockheed, who redesigned them for automobile use.

Visitor Rating:


back
Unique Cars and Parts USA - The Ultimate Classic Car Resource
next