Mercedes Benz 200D (110) Technical Specifications

Send This Page To A Friend

Mercedes 200D
Mercedes Color Codes
Mercedes Color Codes
  • Years of Manufacture: 1965 - 1968
  • Number Built: 161,618
  • Price at Introduction:
    • 200D Sedan: DM 11,300
    • Power Steering: DM 500
    • Automatic Transmission: DM 1,400
  • Date of Introduction:
    • July, 1965
  • Chassis/Body:
    • Unit frame and body
  • Exterior Dimensions:
    • Total Length: 186.5 inches (4730mm)
    • Total Width: 70.7 inches (1795mm)
    • Height at Kerb Weight Sedan: 58.8 inches (1495mm)
    • Wheelbase: 106.3 inches (2700mm)
    • Front Track: 58.3 inches (1482mm)
    • Rear Track: 58.5 inches (1485mm)
  • Kerb Weight:
    • 2915lb (1325kg)
  • Fuel Tank:
    • 17.2 gallons (65.0 liters)
  • Turning Circle:
    • 39.0 ft (11.8 metres)
  • Instruments:
    • Speedometer
    • Petrol gauge
    • Temp warning lamp
    • Oil warning lamp
  • Transmission (Manual, 4 speed):
    • 1st: 4.09:1
    • 2nd: 2.25:1
    • 3rd: 1.42:1
    • 4th: 1.00:1
  • Transmission (Automatic, 4 speed):
    • 1st: 3.98:1
    • 2nd: 2.25:1
    • 3rd: 1.58:1
    • 4th: 1.00:1
  • Clutch:
    • Single cushion disc, dry plate clutch
  • Rear Axle Ratio:
    • 3.92:1
  • Engine Speed at 100 km/h:
    • 3300 rpm
  • 0-60 mph (0-97 km/h):
    • Manual: 29.0 seconds (approx)
    • Automatic: 30.0 seconds (approx)
  • Maximum Speed:
    • Manual: 130 km/h (81 mph)
  • Engine 4 Cylinder OM 621:
    • Capacity: 1988cc 121.27ci
    • Type: Diesel, watercooled four stroke, reciprocating piston type with 4 cylinders
    • Configuration: Front mounted, longitudinal, inline
    • Head: Pushrod and rocker actuated ohv with one valve per cylinder, overhead camshaft
    • Fuel System: Bosch Injection Pump
    • Bore and Stroke: 87 x 83.6mm (3.43 x 3.29in.)
    • Power: 55 hp DIN @ 4200rpm, 60hp SAE
    • Torque: 11.5 mkg @ 2400rpm (87 ft/lb)
    • Compression Ratio: 21.0:1
  • Ignition and Electrical:
    • 12 volt
    • Coil and alternator
  • Exhaust:
    • Single tail-pipe
  • Suspension:
    • Front: Independent type with coil springs
    • Rear: Single joint swing axle with coil springs
    • Air suspension optional
  • Steering:
    • Recirculating ball, ratio 22.7:1 (4.1 turns)
    • Optional servo-assisted: 17.3:1 (3.2 turns)
  • Brakes:
    • Front: Disc, 253mm 9.96 inch
    • Rear: Drum, 230mm 9.06 inch
    • Servo assisted, two circuit hydraulic
  • Wheels:
    • 13" Pressed steel disc wheels
  • Tyres:
    • 7.00 x 13
200D 4 Door Sedan Production Schedule
Vehicle
Year
Cars Manufactured
200D (110) Sedan

1965

30,937
 
1966
61,707
 
1967
68,399
 
1968
575
 
Total:
161,618
Unique Cars and Parts USA - The Ultimate Classic Car Resource